Follow
Make every move in the right order.
How it works
How Tie Template works. A hands-on tie-tying guide.
Tie Template is a physical, hands-on guide for learning real necktie knots. Load the tie, follow the route with your own hands, and release the finished knot.
See the 3 moves ↓Before you tie
Know the Tie Template.
Face it exactly as pictured. The top clips point up, and left and right match what you see—not the person across from you.
- Outer neck loop opening
- The long red opening across the top. This is part of the tool—not the loop that goes around your neck.
- Inner neck loop opening
- The V-shaped opening between the forks. Keep the crossing and knot body centered over it.
- Left and right forks
- The two center arms. If a step names a fork, move the tie over or under that exact arm.
- Top clips
- Slide the tie under these first. They keep both ends from moving while you work.
- Sliding release bar
- Open this only after the final step so the finished knot can lift out cleanly.
Three simple moves
The guide keeps your place.
You do the tying.
01 · Load
Load
Set the tie.
Face the template as shown in the parts guide. Slide both ends under the top clips and keep the fabric flat.
02 · Follow
Follow
Move the wide end.
Take it over, under, or through exactly where your knot guide shows.
03 · Release
Release
Open. Lift. Set.
Slide the bar open. Lift out the knot. Set it at your collar.
Why it works
Your hands remember.
No pre-tied shortcut. You learn the real move.
Check
Catch a missed pass before you finish.
Own it
Use the guide less as confidence takes over.
Steel finish · angled viewDesigned around the tie
Hold steady. Release clean.
Top clips keep the tie in place. The sliding bar opens the guide when the knot is ready.
Choose your knot →